Vcon 3000 manual

It is recommended that the user protect this wire with a 20 Amp fuse or circuit breaker located at the source. Use 14 gauge wire. This supplies ground earth to the siren. S4 — 58W Speaker , connect to the remaining speaker lead for 58W speaker only.

S6 — Remote input Horn ring or foot switch can be configured for either ground earth or positive signals. Unit is configured for a ground earth at the factory. It is not an adequate ground earth for the siren or the light bar. It is recommended all ground earth wires attached here be terminated with a crimp-on ring terminal.

Install appropriate fuses in each output wire as close to the siren as possible. Terminals are a SPDT circuit that may be connected as a momentary or latching depending on the switch ordered ignition controlled circuit, or used for switching auxiliary circuits.

It will Handle 10 Amps, and should be protected with a fuse at the battery if individually fed. Locate the fuse or circuit breaker at the battery and use size 10 AWG wire minimum.

This terminal powers the 3-Level lighting control switch only. Position 1 — Supplies power to Lighting Level 1. Illuminates Green LED. Activates LightAlert if supplied. Activates LightAlert and SirenLock options if supplied. Activates LightAlert and SirenLock if supplied.

LightAlert TM L4 Models Only - An audible alarm pulse that indicates that either the primary warning system or one of the auxiliary control circuits is on. User defeatable. SirenLock TM L4 and L6 Models Only - An interlock circuit between the siren and the light control circuits that permits automatic siren tones only when the progressive switch is in Level 3 or in Level 2 or 3 user selectable — works in conjunction with the horn transfer relay.

This feature is used in jurisdictions that require warning lights to be on before the siren is activated. Pluggable Microphone — A plug-in microphone jack in lieu of the standard wired-in microphone may be specified.

A plug-in noise-canceling microphone must be ordered separately if needed. Code 3 V-Con Advertisement. Code 3 V-Con Operation Manual. Code 3 V-Con Siren. General Specs Dimensions: 6.

The headings of the sections of this Agreement are inserted for convenience only and shall not constitute a part hereof or affect in any way the meaning or interpretation of this Agreement. Except as otherwise expressly provided herein, the provisions of section 3 and section 4 together with any provisions that by their express terms apply to periods after termination of this Agreement, shall survive termination of this Agreement for any reason.

Other products. Download Center D D Other products. Manuals Manuals Firmware Software. Title Language Size. Reference Manual English for customers in Europe User's Manual English for customers in Europe 6. Firmware Manuals Firmware Software. Software Manuals Firmware Software. Download software for Nikon products. Although your device does not support this download service, it can be used to view download information. Title Version Released. ViewNX-i Full Ver.

ViewNX 2 Full Ver. Capture NX 2 Full Ver. Other products Back.