There won't be any "Computer Name" in the first box, so just enter Ooma Device as the identifier. Click SAVE. Make a note of the reserved IP address since thats the ONLY way that you will be able to access the Ooma config page because neither Assuming all went well, your Ooma device should be all Blue if not, press the top middle button until it is all bright enough to see.
You can now also access the Ooma device via the reserved IP address from Step 5. QOS: Very straight-forward. Since you have a top-of-the line router, it can do better QOS than the Ooma device.
Open your browser and go to You might want to add it to your bookmark favorites. Be Happy. Worked fine with the default out of the box settings for the router and Ooma hub. I've had my DIR configured with two Ooma Hubs behind it exactly as you suggest for the last two months and the call quality on both Hubs remains excellent even during heavy Internet traffic.
Setting it to "50" leaves the possibility of the user setting the Priority of another IP device higher less than Keep in mind different firmware versions will interact with hosted VoIP services in different ways.
Procedure Note : The DIR may require a fair amount of configuration changes to optimize performance the first time around. Administrative Information Make sure your router is powered on and connected to your network. In a browser on a computer on the same network as the router, navigate to the following IP address: Log in default credentials shown below.
Although it suppose to work with both. So is everything working? It was okay until now i enabled wireless and connected my brothers laptop. Maybe i need to setuo QOS engine rules now.
What you and him have for wireless G or N? P2P use the wired connection as wireless is okay but for speed wired would be better. Remember wireless gives you freedom to move around. If you got N then P2P would be okay. The QOS engine you could leave alone. XP Pro, Vista U, if you have these version? Wireless will go up and down more in G than in N but it varies.
Just like with your cell phone. He have only G so i set it up for G only mode. I have vista ultimate,he home edition. Is better to leave or disable QOS engine? Look at the QOS section. Here's update scale instead of using the 80 you see above you can now use 72, since you play games. I have all now wiered and it still disconnects sometimes. Notice that it hapens mostly when i write something at forums,if it takes long and i dont browse at that time it just disconnects.
Which browser are you using? Also have you scan for pest on the system. Run that see if it finds anything and then clean off the system. I have internet explorer 7.
0コメント